#Dragon cargo craft reaches port at International Space Station

A Dragon spacecraft loaded with nearly 5,000 pounds of cargo arrived at the International Space Station on Wednesday. Credit: NASA/Jeff Williams
A Dragon spacecraft loaded with nearly 5,000 pounds of cargo arrived at the International Space Station on Wednesday. Credit: NASA/Jeff Williams

A commercial resupply freighter owned and operated by SpaceX wrapped up a two-day trip to the International Space Station on Wednesday, delivering a new docking port and two tons of other equipment to research laboratory more than 250 miles (400 kilometers) above Earth.

The equipment will support more than 250 science investigations in the coming months, and help ready the space station to receive new U.S.-built space capsules carrying astronauts as soon as next year.

The Dragon spacecraft, measuring 12 feet (3.7 meters) in diameter and nearly 24 feet (7.2 meters) long, approached the space station from below, its outline growing in size backdropped by the blue hues of Earth.

With laser ranging sensors and thermal cameras feeding rendezvous data to Dragon’s flight computer, the cargo capsule slowly climbed toward the station from directly underneath, pausing a pre-selected locations before reaching a final capture point about 30 feet, or 10 meters, from the complex.

Ground controllers at SpaceX headquarters in Hawthorne, California, monitored the Dragon’s approach, while engineers at NASA’s control center in Houston were in charge of the space station.

Astronaut Jeff Williams, at the controls of the station’s Canadian-built robotic arm, grappled the Dragon spacecraft at 6:56 a.m. EDT (1056 GMT) as the outpost sailed more than 250 miles over the Great Lakes.

“Houston, station, on space-to-ground 2, we’ve captured us a Dragon,” Williams radioed mission control. “Congratulations to the entire team that put this thing together, launched it, and successfuly rendezvoused it to the International Space Station. We look forward to the work that it brings.”

This view of a television monitor on the space station shows an overlay seen by astronauts as the Dragon cargo capsule approached the complex. Credit: NASA TV/Spaceflight Now
This view of a television monitor on the space station shows an overlay seen by astronauts as the Dragon cargo capsule approached the complex. Credit: NASA TV/Spaceflight Now

Ground controllers took over the robotic arm to maneuver the solar-powered Dragon spaceship to the Earth-facing port on the station’s Harmony module. Once in place, 16 bolts engaged to firmly attach the cargo delivery craft to the complex, where it will stay until Aug. 29.

The rendezvous came two days after the Dragon spacecraft blasted off early Monday from Cape Canaveral atop a Falcon 9 rocket on SpaceX’s ninth operational resupply run to the space station. The company is under contract for at least 17 more cargo flights through 2024.

The mission’s cargo manifest includes 4,976 pounds — nearly 2.3 metric tons — of supplies and experiments, including a new docking system to connect with the CST-100 Starliner and Crew Dragon piloted spacecraft made by Boeing and SpaceX under commercial partnerships with NASA.

The International Docking Adapter-2, or IDA-2, is bolted inside the Dragon’s unpressurized cargo carrier, or trunk. The space station’s robotic arm will pluck the docking adapter from the Dragon’s trunk Aug. 16, and Williams and crewmate Kate Rubins will go outside on a spacewalk Aug. 18 to help install the new docking port on the front end of the Harmony module, where Boeing’s CST-100 Starliner and SpaceX’s Crew Dragon crew capsules will park with arriving astronauts.

A similar docking adapter was lost in June 2015 when a Falcon 9 rocket disintegrated over the Atlantic Ocean two minutes after launch, destroying a Dragon cargo freighter and its contents.

International Docking Adapter-2 was installed into the Dragon spacecraft's trunk section May 19. Credit: SpaceX
International Docking Adapter-2 was installed into the Dragon spacecraft’s trunk section May 19. Credit: SpaceX

IDA-2 weighed about 1,029 pounds (467 kilograms) at launch, measuring about 42 inches (1.1 meters) tall and 63 inches (1.6 meters) wide.

“The docking adapter is another step forward to enabling the commercial crew vehicles,” said Joel Montalbano, NASA’s deputy program manager for space station utilization.

The docking port is one of the largest external components to be added to the space station since large-scale assembly of the outpost ended with the retirement of the space shuttle in 2011.

Spacewalkers will install the docking adapters over the station’s existing U.S. arrival ports designed for space shuttle dockings. The new docking ports use a different design to receive any spacecraft, including the SpaceX Crew Dragon and Boeing CST-100 Starliner spacecraft, future cargo freighters, and other craft yet to be developed.

Kirk Shireman, NASA’s International Space Station program manager, said before Monday’s launch that the docking adapters are built to an international, open-source standard. The design could be used if NASA deploys mini-space station near the moon in the 2020s, a project that could be a stepping stone to fine-tune techniques and technologies for a future human expedition to Mars.

“It’s quite possible, although we don’t have a definitive plan, that we’ll fly something very similar to this idea to cis-lunar space in the future,” Shireman said.

NASA signed a $9 million contract with Boeing to build a third docking port to replace the unit lost last year. It is set for launch on a SpaceX Dragon capsule in 2018. The space agency wants two docking adapters on the space station to support the presence of two U.S. crew vehicles at the same time.

Artist's concept showing the locations planned for the first two International Docking Adapters. IDA 2, set for launch this summer, will take the place intended to be occupied by IDA 1 on the forward part of the Harmony module. IDA 3 will take the zenith port on Harmony. Credit: NASA
Artist’s concept showing the locations planned for the first two International Docking Adapters. IDA 2, set for launch this summer, will take the place intended to be occupied by IDA 1 on the forward part of the Harmony module. IDA 3 will take the zenith port on Harmony. Credit: NASA

The space station needs two docking ports outfitted for the CST-100 Starliner and Crew Dragon capsules for two of the capsules to reside at the complex simultaneously. That would allow for a new space station expedition crew to arrive before the old crew departs.

With one docking port, the outgoing crew must return to Earth before a fresh crew arrives.

SpaceX and Sierra Nevada Corp. plan to offer NASA the option of docking capability on future resupply missions with the Dragon and Dream Chaser cargo spacecraft. Orbital ATK, NASA’s other cargo transportation provider, is sticking with the berthing scheme currently in use, which allows larger equipment to be transferred inside the space station through a larger hatch.

“Obviously, with two docking ports, we’re golden,” Shireman said. “The real tricky part is when you start throwing in cargo vehicles that are going to dock. Now you have three vehicles, and you only have two ports, and things get a little more complicated.”

Email the author.

Follow Stephen Clark on Twitter: @StephenClark1.

from Spaceflight Now ift.tt/29O25t4

Leave a Reply

Your email address will not be published. Required fields are marked *

The CAPTCHA cannot be displayed. This may be a configuration or server problem. You may not be able to continue. Please visit our status page for more information or to contact us.

This site uses Akismet to reduce spam. Learn how your comment data is processed.